obs-ffmpeg-encoder/data/locale/en-US.ini

# Generic
State.Automatic="Automatic"
State.Default="Default"
State.Disabled="Disabled"
State.Enabled="Enabled"
State.Manual="Manual"

# FFmpeg
FFmpeg="FFmpeg Options"
FFmpeg.CustomSettings="Custom Settings"
FFmpeg.CustomSettings.Description="Custom settings that override any detected options above, use with caution.\nThe input should be in the format 'key=value;key=value;...'."
FFmpeg.Threads="Number of Threads"
FFmpeg.Threads.Description="The number of threads to use for encoding, if supported by the encoder.\nA value of 0 is equal to 'auto-detect' and may result in excessive CPU usage."
FFmpeg.ColorFormat="Override Color Format"
FFmpeg.ColorFormat.Description="Overriding the color format can unlock higher quality, but might cause additional stress.\nNot all encoders support all color formats, and you might end up causing errors or corrupted video due to this."
FFmpeg.StandardCompliance="Standard Compliance"
FFmpeg.StandardCompliance.Description="How strict should the encoder keep to the standard? A strictness below 'Normal' may cause issues with playback."
FFmpeg.StandardCompliance.VeryStrict="Very Strict"
FFmpeg.StandardCompliance.Strict="Strict"
FFmpeg.StandardCompliance.Normal="Normal"
FFmpeg.StandardCompliance.Unofficial="Unofficial"
FFmpeg.StandardCompliance.Experimental="Experimental"

# Rate Control
RateControl="Rate Control"
RateControl.Mode="Method"
RateControl.Mode.ConstantBitrate="Constant Bitrate"
RateControl.Mode.AverageBitrate="Average Bitrate"
RateControl.Mode.VariableBitrate="Variable Bitrate"
RateControl.Mode.ConstantQuantizationParameter="Constant Quantization Parameter"
RateControl.Mode.ConstantRateFactor="Constant Rate Factor"
RateControl.Mode.ConstantQuality="Constant Quality"
RateControl.Mode.VariableQuality="Variable Quality"
RateControl.Mode.Lossless="Lossless"
RateControl.Bitrate.Target="Target Bitrate"
RateControl.Bitrate.Minimum="Minimum Bitrate"
RateControl.Bitrate.Maximum="Maximum Bitrate"
RateControl.Quality.Target="Target Quality"
RateControl.Quality.Minimum="Minimum Quality"
RateControl.Quality.Maximum="Maximum Quality"
RateControl.BufferSize="Buffer Size"
RateControl.BufferSize.Description="The size of the buffer to use when determining the remaining available bitrate.\nIdeally should be equal to your bitrate times the key frame interval in seconds."

# Key Frames
KeyFrames="Key Frames"
KeyFrames.IntervalType="Interval Type"
KeyFrames.IntervalType.Frames="Frames"
KeyFrames.IntervalType.Seconds="Seconds"
KeyFrames.IntervalType.Description="Keyframe interval type"
KeyFrames.Interval.Description="Distance between key frames, in frames or seconds.\nHigher values allow for more efficient compression,\nat the expense of slower seeking; some video editors may\nsuffer a performance decrease. Default is 2 seconds."
KeyFrames.Interval="Interval"

# Codec: H264
Codec.H264="H264"
Codec.H264.Profile="Profile"
Codec.H264.Profile.baseline="Baseline"
Codec.H264.Profile.main="Main"
Codec.H264.Profile.high="High"
Codec.H264.Profile.high444p="High 4:4:4 Predictive"
Codec.H264.Profile.Description="H.264 profile determines which features of the codec can be used.\nSince all modern devices can decode High perfectly, you should avoid using Main and Baseline,\nunless you need playback on very old devices and software decoding performance is not satisfactory.\nHigh 4:4:4 Predictive is required for YUV 4:4:4 color space."
Codec.H264.Level="Level"
Codec.H264.Level.Description="Level determines the upper limits of resolution, frame rate and bitrate for the video. Automatic will use the lowest level possible for your settings."

# Codec: HEVC
Codec.HEVC="HEVC"
Codec.HEVC.Profile="Profile"
#Codec.HEVC.Profile.Description="Placeholder text"
Codec.HEVC.Profile.main="Main"
Codec.HEVC.Profile.main10="Main 10-bit"
Codec.HEVC.Profile.rext="Range Extended"
Codec.HEVC.Tier="Tier"
#Codec.HEVC.Tier.Description="Placeholder text"
Codec.HEVC.Tier.main="Main"
Codec.HEVC.Tier.high="High"
Codec.HEVC.Level="Level"
Codec.HEVC.Level.Description="Level determines the upper limits of resolution, frame rate and bitrate for the video. Automatic will use the lowest level possible for your settings."

# Codec: Apple ProRes
Codec.ProRes.Profile="Profile"
Codec.ProRes.Profile.APCO="422 Proxy/PXY (APCO)"
Codec.ProRes.Profile.APCS="422 Light/LT (APCS)"
Codec.ProRes.Profile.APCN="422 Standard (APCN)"
Codec.ProRes.Profile.APCH="422 High Quality/HQ (APCH)"
Codec.ProRes.Profile.AP4H="4444 Standard (AP4H)"
Codec.ProRes.Profile.AP4X="4444 Extra Quality/XQ (AP4X)"

# NVENC
NVENC.Preset="Preset"
NVENC.Preset.Description="Presets are NVIDIA's preconfigured default settings for NVENC."
NVENC.Preset.Default="Default"
NVENC.Preset.Slow="Slow"
NVENC.Preset.Medium="Medium"
NVENC.Preset.Fast="Fast"
NVENC.Preset.HighPerformance="High Performance"
NVENC.Preset.HighQuality="High Quality"
NVENC.Preset.BluRayDisc="BluRay Disc"
NVENC.Preset.LowLatency="Low Latency"
NVENC.Preset.LowLatencyHighPerformance="Low Latency High Performance"
NVENC.Preset.LowLatencyHighQuality="Low Latency High Quality"
NVENC.Preset.Lossless="Lossless"
NVENC.Preset.LosslessHighPerformance="Lossless High Performance"
NVENC.RateControl="Rate Control Options"
NVENC.RateControl.Mode="Mode"
NVENC.RateControl.Mode.Description="Constant Quantization Parameter: A flat compression ratio with no regard for bit rates. This yields the highest quality-per-bitrate.\nVariable Bitrate: Where appropriate, sacrifices quality to stay below the upper bitrate limit, or saves bitrate where possible.\nHigh Quality Variable Bitrate: Variable Bitrate with two-pass encoding enabled by default.\nConstant Bitrate: Similar to Variable Bitrate, but performs bit stuffing to avoid falling below the target bitrate.\nHigh Quality Constant Bitrate: Constant Bitrate with two-pass encoding enabled by default.\nLow Delay High Quality Constant Bitrate: Optimized for lowest encoding latency, mainly by disabling B-frames and using slice multithreading."
NVENC.RateControl.Mode.CQP="Constant Quantization Parameter"
NVENC.RateControl.Mode.VBR="Variable Bitrate"
NVENC.RateControl.Mode.VBR_HQ="High Quality Variable Bitrate"
NVENC.RateControl.Mode.CBR="Constant Bitrate"
NVENC.RateControl.Mode.CBR_HQ="High Quality Constant Bitrate"
NVENC.RateControl.Mode.CBR_LD_HQ="Low Delay High Quality Constant Bitrate"
NVENC.RateControl.LookAhead="Look Ahead"
NVENC.RateControl.LookAhead.Description="Look ahead this many frames while encoding to better distribute bitrate.\nImproves quality slightly at the cost of some GPU time.\nSet to 0 to disable."
NVENC.RateControl.AdaptiveI="Enable adaptive I-Frame insertion"
NVENC.RateControl.AdaptiveI.Description="Enables adaptive I-Frame insertion.\nOnly has an effect when look ahead is set to a value other than 0."
NVENC.RateControl.AdaptiveB="Enable adaptive B-Frame insertion"
NVENC.RateControl.AdaptiveB.Description="Enables adaptive B-Frame insertion.\nOnly has an effect when look ahead is set to a value other than 0."
NVENC.RateControl.TwoPass="Enable Two Pass"
NVENC.RateControl.TwoPass.Description="Enable a secondary pass for encoding, which can help with quality and bitrate stability.\nImproves quality slightly at the cost of some GPU time.\nNvidia Turing hardware might actually see a quality degrade from this."
NVENC.RateControl.Bitrate="Bitrate Limits"
NVENC.RateControl.Bitrate.Target="Target Bitrate"
NVENC.RateControl.Bitrate.Target.Description="Target bitrate, in kilobits per second."
NVENC.RateControl.Bitrate.Maximum="Maximum Bitrate"
#NVENC.RateControl.Bitrate.Maximum.Description="Plaseholder text"
NVENC.RateControl.Quality="Enable Quality Limits"
NVENC.RateControl.Quality.Minimum="Minimum Quality"
NVENC.RateControl.Quality.Minimum.Description="Minimum quality to achieve, with values closer to 0 being better quality."
NVENC.RateControl.Quality.Maximum="Maximum Quality"
NVENC.RateControl.Quality.Maximum.Description="Maximum quality to achieve, with values closer to 0 being better quality.\nSet to -1 to disable the maximum restriction."
NVENC.RateControl.Quality.Target="Target Quality"
NVENC.RateControl.Quality.Target.Description="Target quality to achieve, with values closer to 0 being better quality.\nSet to 0 to disable the maximum restriction."
NVENC.RateControl.QP="Quantization Parameters"
NVENC.RateControl.QP.I="I-Frame QP"
NVENC.RateControl.QP.I.Description="Quantization parameter for I-Frames.\nSmaller values mean better quality in exchange for higher bitrate, while higher values mean less bitrate in exchange for less quality."
NVENC.RateControl.QP.I.Initial="Initial I-Frame QP"
NVENC.RateControl.QP.I.Initial.Description="Initial B-Frame quantization parameter.\nSet to -1 to use the automatically detected value instead."
NVENC.RateControl.QP.P="P-Frame QP"
NVENC.RateControl.QP.P.Description="Quantization parameter for P-Frames.\nSmaller values mean better quality in exchange for higher bitrate, while higher values mean less bitrate in exchange for less quality."
NVENC.RateControl.QP.P.Initial="Initial P-Frame QP"
NVENC.RateControl.QP.P.Initial.Description="Initial P-Frame quantization parameter.\nSet to -1 to use the automatically detected value instead."
NVENC.RateControl.QP.B="B-Frame QP"
NVENC.RateControl.QP.B.Description="Quantization parameter for B-Frames.\nSmaller values mean better quality in exchange for higher bitrate, while higher values mean less bitrate in exchange for less quality."
NVENC.RateControl.QP.B.Initial="Initial B-Frame QP"
NVENC.RateControl.QP.B.Initial.Description="Initial B-Frame quantization parameter.\nSet to -1 to use the automatically detected value instead."
NVENC.AQ="Adaptive Quantization"
NVENC.AQ.Spatial="Enable Spatial Adaptive Quantization"
NVENC.AQ.Spatial.Description="Enable spatial adaptive quantization, also sometimes referred to as Psychovisual Adaptive Quantization."
NVENC.AQ.Strength="Spatial AQ Strength"
NVENC.AQ.Strength.Description="Strength of the spatial adaptive quantization.\nValues closer to 15 mean more aggressive, while values closer to 1 mean more relaxed."
NVENC.AQ.Temporal="Enable Temporal Adaptive Quantization"
NVENC.AQ.Temporal.Description="Enable temporal adaptive quantization."
NVENC.Other="Other Options"
NVENC.Other.BFrames="Maximum B-Frames"
NVENC.Other.BFrames.Description="Maximum number of B-Frames to insert into the encoded bitstream.\nOnly Turing NVENC supports B-Frames for HEVC.\nActual number of B-Frames may be lower depending on content and lookahead settings."
NVENC.Other.BFrameReferenceMode="B-Frame Reference Mode"
NVENC.Other.BFrameReferenceMode.Each="Each B-Frame will be used for references"
NVENC.Other.BFrameReferenceMode.Middle="Only (# of B-Frames)/2 will be used for references"
#This is already explained in the drop-down list, but there is also a placeholder tooltip text. Is there a way to disable the tooltip here?
#NVENC.Other.BFrameReferenceMode.Description="Plaseholder text"
NVENC.Other.ZeroLatency="Enable Zero Latency"
NVENC.Other.ZeroLatency.Description="Enable zero latency operation, which ensures that there is no reordering delay."
NVENC.Other.WeightedPrediction="Enable Weighted Prediction"
NVENC.Other.WeightedPrediction.Description="Enable weighted prediction for encoding.\nCan't be used with B-Frames."
NVENC.Other.NonReferencePFrames="Enable non-reference P-Frames"
NVENC.Other.NonReferencePFrames.Description="Enable the automatic insertion of non-reference P-Frames."