Otherwise p->linesize[0] * y will be evaluated as an unsigned
which leads to segfaults in case linesize is negative.
This happens in the apng-dispose-previous FATE-test in case
one makes get_buffer return pictures with negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
partial_corr is an int16_t and so the av_clipl_int32()
never clips and can be removed. This also avoids
undefined left-shifts of negative numbers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Return immediately if not enough leftover bits are available
when flushing. This is simpler and also avoids an
init_get_bits(gb, NULL, 0) (which currently leads to NULL + 0,
which is UB; this affects the lossless-wma(|-1|-2|-rawtile)
FATE tests).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Happens when flushing. This triggers NULL + 0 (which is UB) in
init_get_bits_xe (which previously errored out, but the return value
has not been checked) and in copy_bits().
This fixes the wmavoice-(7|11|19)k FATE-tests with UBSan.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
src2 is used in CAVS_SUBPIX_HV iff FULL is true (it is exactly
for the egpr functions); otherwise it might be NULL. So check
for FULL before doing pointer arithmetic.
Fixes a "src/libavcodec/cavsdsp.c:524:1: runtime error: applying
non-zero offset 8 to null pointer" from UBSan.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
As long as ff_mpeg12_common_init() existed in mpeg12.c,
it added a dependency of mpeg12.o on mpegvideodata.o
(which provides ff_mpeg2_dc_scale_table, which is used
in ff_mpeg12_common_init()). mpegvideodata.o is normally
provided by the mpegvideo subsystem and therefore several
codecs and the MPEG-1/2 parser added a configure dependency
on said subsystem (additionally, the eatqi decoder just
added a Makefile dependency on mpegvideodata.o).
Given that ff_mpeg12_common_init() is no more, these dependencies
can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It only sets [yc]_dc_scale_table and these tables are only
read in ff_set_qscale(); but the MPEG-1/2 decoders don't call
ff_set_qscale() at all.
(Furthermore, given that intra_dc_precision is always zero
for a decoder at this point, ff_mpeg12_common_init()
actually set these pointers to what ff_mpv_common_defaults()
already set them.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is better place for these declarations than
mpeg12data.h as RL VLC are just a variant of VLCs.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Starting with an h264 implementation. Can be extended to support other codecs.
A few caveats:
- OpenGOP streams are currently not supported. The firt packet must be an IDR
frame.
- In some streams, a few frames at the end may not get a reordered PTS when
they reference frames past EOS. The code added to derive timestamps from
previous frames needs to extended.
Addresses ticket #502.
Signed-off-by: James Almer <jamrial@gmail.com>
Provide optimized implementation for vsse_intra8 for arm64.
Performance tests are shown below.
- vsse_5_c: 87.7
- vsse_5_neon: 26.2
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Co-authored-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of vsse8 for arm64.
Performance comparison tests are shown below.
- vsse_1_c: 141.5
- vsse_1_neon: 32.5
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Add vectorized implementation of nsse8 function.
Performance comparison tests are shown below.
- nsse_1_c: 256.0
- nsse_1_neon: 82.7
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of pix_abs8 function for arm64.
Performance comparison tests are shown below:
pix_abs_1_1_c: 162.5
pix_abs_1_1_neon: 27.0
pix_abs_1_2_c: 174.0
pix_abs_1_2_neon: 23.5
pix_abs_1_3_c: 203.2
pix_abs_1_3_neon: 34.7
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Co-authored-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
vorbis.h currently contains stuff only used by the native
Vorbis codecs and some Vorbis tables, which are also used by
Opus and libvorbis. Therefore split the data out into a header
of its own.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Don't increment back_frame if it does not correspond
to a real buffer. To do this, handle copying from
the back frame separately from the "use coded value"
codepath; also use memcpy for the former, as the
chunks here are typically worth it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This check is intended to be avoid buffer overflows,
yet there are four problems with it:
1. It has an in-built off-by-one error: len == out_end - out
is perfectly fine and nothing to worry about.
This off-by-one error led to the pixel in the lower-right corner
not being set properly for the back frame of the sample from
the rl2 FATE-test. This pixel is copied to every frame which
is the reason for the update to the reference file of said test.
With this patch, the output of the decoder matches the output
as captured from the reference decoder* (apart from the fact
that said reference somehow lacks the top part of the frame
(copied over from the background frame)).
2. Given that the stride of the buffer may be different
from the width of the video (despite one pixel taking one byte),
there is a second check lateron making the first check redundant
(if one returns immediately; a simple break at the second check
is not sufficient, because it only exits the inner loop).
3. The check is based around the assumption of the stride being
positive (it has this in common with the other check which
will be fixed in a future commit).
4. Even after fixing the off-by-one error, the check in
question is still triggered by all the non-background frames
in the FATE sample as well as by A1100100.RL2. In all these
cases, they use len == 255 and val == 128. For videos with
background frame this just means "copy from the background
frame", which would be done anyway lateron.* Yet for videos
without it copying it is necessary to avoid leaving
uninitialized parts in the video.
*: Available in https://samples.mplayerhq.hu/game-formats/voyeur-rl2/
**: Due to this, the code that copies the rest from the
back frame is no longer executed for any of the samples
available on the sample server. Given that these are only
the files from the demo version of this game, I don't know
whether this code is executed for any file in existence or not.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only used by three of the thirty files that (potentially
indirectly) include mpeg4audio.h. Twenty of these files won't
have a put_bits.h inclusion any more after this patch.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows av_mediacodec_release_buffer to be called safely after
the decoder is closed, this was already the case with delay_flush=1.
Note that this causes holding onto frames to keep the decoding context
alive which is generally considered to be the intended behavior.
Signed-off-by: sfan5 <sfan5@live.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also remove a variable that is only used in this commented-out
codeblock. This fixes a -Wunused-variable warning.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Set preset default value to MFX_TARGETUSAGE_UNKNOWN. Let runtime to
decide the targetUsage, so that ffmpeg-qsv can keep up with runtime's
update.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Unset qsv_h264 and qsv_hevc's default settings. Let runtime to decide
these parameters, so that it can choose the best parameter and ffmpeg-qsv
can keep up with runtime's update.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
This avoids one redundant load per row; pix3 from the previous
iteration can be used as pix2 in the next one.
Before: Cortex A53 A72 A73
pix_abs_0_2_neon: 138.0 59.7 48.0
After:
pix_abs_0_2_neon: 109.7 50.2 39.5
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes the j2k-dwt FATE-test; also fixes#9945.
(I don't know whether the multiplication can overflow.)
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Possible since 48ac225db2.
Furthermore, the current code would not work on mips
in case ff_lsp2polyf() were used outside of lsp.c,
because it is not compiled on mips since commit
3827a86eac at all;
instead it is overridden with a static av_always_inline
function which only works for the callers in lsp.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Will avoid a forward declaration lateron.
Also adapt the function to modern style while at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They will be mistaken for the sentinel of the arrays
they are in, thereby hiding the 6.1, 7.1 and 22.2 layouts.
(This doesn't really matter, as these arrays are informational
only for decoders.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt